fbpx

Cosmetic Health News

Cosmetic Health News by the experts

breast implant

Category: CoolSculpting

How Much Does Coolsculpting Cost In El Paso?

How Much Does Coolsculpting Cost In El Paso?

Do you have a few problem areas that you can’t seem to remove with diet and exercise? Why not reshape your body with CoolSculpting. CoolSculpting is a popular body contouring treatment in El Paso, because it is a completely non-surgical procedure that requires no anesthesia, no incisions, and no downtime. But how much does CoolSculpting cost in El Paso.

What exactly is CoolSculpting?

CoolSculpting is a non-surgical fat reduction procedure that uses controlled cooling to diminish unwanted fat bulges in targeted sites. Once the areas are cooled the fat cells crystallize and die. They are then absorbed by the body and eliminated in the following months. CoolSculpting is able to freeze away unwanted fat, because fat cells are more susceptible to cold temperature than the surrounding cells and tissue.

Where can Coolsculpting treat?

CoolSculpting is used to treat the abdomen, flanks, inner and outer thighs, upper arms, bra fat, back fat, submental area, and beneath the buttocks.

How Much Does Coolsculpting Cost In El Paso?

The cost of CoolSculpting depends on the areas being treated, and the number of treatments needed to get the desired results.

CoolSculpting is priced per area. Larger areas such as the abdomen or flanks typically cost between $1,200 and $1,500, while smaller areas like the upper arms or beneath the chin, can cost between $600 and $800 per treatment. Patients should take note that every area is priced individually, e.g. each thigh is considered a separate treatment area and is priced accordingly.

The above is only an approximate cost, so patients have to visit a CoolSculpting specialist for an assessment and accurate quote.

Do you want to learn more about CoolSculpting in El Paso?

Contact El Paso Cosmetic Surgery for more information.

You can reach them at www.elpasoplasticsurgery.com, or by calling (915) 800-0554 for a consultation.

How many CoolSculpting sessions will I need to see results?

How many CoolSculpting sessions will I need to see results?

If you are thinking about getting CoolSculpting, you may be wondering – How many CoolSculpting sessions will I need to see results. CoolSculpting is a great way to reduce troublespots that are difficult to get rid of with diet and exercise. But the number of sessions needed will depend on various factors, including how your body responds to treatment.

How CoolSculpting freezes away unwanted fat

CoolSculpting uses controlled cooling to freeze away unwanted fat. The cold temperatures selectively target and destroy the fat cells, which are more susceptible to the cold temperature. The treated fat cells are then naturally metabolized by the body over the following weeks and months.

How many CoolSculpting sessions will I need to see results?

A single CoolSculpting session reduces fat in the treated area by 20-25%. Physicians often wait to see the type of results patients get after an initial treatment, before deciding if more sessions are necessary.

The results of CoolSculpting are not immediately visible. While some improvement may be seen within 3 weeks, it can take up to 3 months for the final results to show. Patients that would like more improvement after that time may require an additional session.

The number of sessions you will need to see results is very dependent on your expectations, as well as the number of areas that require treatment.

What areas can CoolSculpting Treat?

CoolSculpting is FDA approved for treating the abdomen, submental area, flanks, inner and outer thighs, bra fat, back fat, upper arms, and fat beneath the buttocks.

Are you interested in CoolSculpting? Search our directory to find a practice in your area.

If you are in the Tupelo, MS area, Accent Plastic & Reconstructive Surgery is our featured practice.

You can reach them at www.drmarkcraig.com, or by calling (662) 377-6290.

When Will I See Results From Coolsculpting?

When Will I See Results From Coolsculpting?

Have you decided to have CoolSculpting treatment done to reduce those stubborn areas of fat? If so, you may be concerned about what to expect with the procedure, and chances are you want to know when you are likely to see results from CoolSculpting.

CoolSculpting fat reduction treatment

CoolSculpting is a completely non-invasive fat reduction procedure that uses controlled cooling to reduce fat deposits that don’t respond to diet and exercise. It works on the principle that fat cells are more susceptible to cold temperature that other cells and tissue.

There is no downtime after CoolSculpting, so most patients are able to resume normal activities right away.

CoolSculpting can be used on the abdomen, flanks, inner and outer thighs, back fat, bra fat, upper arms, submental area, and beneath the buttocks.

When Will I See Results From Coolsculpting?

The results from CoolSculpting are not immediate, because the body takes a few weeks to metabolize and expel the fat cells treated during the procedure. Fat reduction and changes in body contours therefore occur gradually.

Some patients respond to CoolSculpting very quickly, so they notice visible reduction in fat within 3-4 weeks of treatment, but others see no change until 6-8 weeks after treatment. The most dramatic results can be seen after about 3-4 months.

After a single round of CoolSculpting, most patients can expect to experience a 20-25% reduction in fat in the treated area. The results achieved with CoolSculpting are long-lasting, because the treated fat cells are gone for good.

Would you like to learn more about CoolSculpting fat reduction? Search our directory to find a practice in your area.

If you are in the Reno, NV area, Renew MD is our featured practice.

You can reach them at www.renewmdreno.com, or by calling 775-502-0514.

How Many Coolsculpting Cycles Do I Need?

How Many Coolsculpting Cycles Do I Need?

If you’ve been struggling to reduce a few areas of stubborn fat, CoolSculpting may be the ideal fix for you. CoolSculpting is an innovative fat reduction procedure that freezes away unwanted fat. One of the most common questions people have about the procedure is – How many CoolSculpting cycles do I need.

What areas can be treated with CoolSculpting?

CoolSculpting is a non-invasive, non-surgical treatment that is FDA approved for treating several areas of the body including the abdomen, thighs, upper arms, flanks, submental area, and back. CoolSculpting uses a system of controlled cooling to freeze and eliminate stubborn fat.

How Many Coolsculpting Cycles Do I Need?

A CoolSculpting cycle is basically a single treatment on a specific area. Depending on the size of the area, a treatment takes between 35 to 60 minutes to complete.

The number of cycles you need will depend on the number of areas being treated. The CoolSculpting applicator treats one portion of the body at a time, so an area like the flanks will require 2 cycles, one for each side, whereas, the submental area needs only one cycle.

The aesthetic results you desire will also impact the number of CoolSculpting cycles you need. A single CoolSculpting cycle reduces fat in the area by 20-25%, but if you would like more improvement, another session may be necessary. Physicians generally advise patients to wait until they see the final results before deciding if they want another treatment. It can take 2-3 months for optimal results to appear (click here to learn more).

Are you ready to schedule your CoolSculpting treatment? Search our directory for a practice in your area.

If you are in Toronto or Mississauga, ON, areas, Skinatomy Laser Clinic is our featured practice.

You can reach them at www.skinatomylaserclinic.com, or by calling (647) 557-2730 (Toronto) or (289) 809-5113 (Mississauga).

When will I see results from Coolsculpting?

When will I see results from Coolsculpting?

If you are thinking about scheduling a CoolSculpting treatment to get rid of stubborn fat, you’re probably anxious to find out when you will see results from CoolSculpting. There are quite a few technologies available for non-invasive fat reduction, but CoolSculpting is the favorite of many. It is safe, effective and provides natural looking results.

CoolSculpting fat reduction

CoolSculpting fat reduction treatment uses controlled cooling to freeze away unwanted fat that is resistant to diet and exercise. It gets rid of approximately 25% of fat in the treated area in a single session. However, some people may need multiple treatments.

CoolSculpting is FDA approved for treating fat bulges on the abdomen, upper arms, flanks, inner and outer thighs, and the submental area (double chin). It also reduces back fat, bra fat, and fat beneath the buttocks.

A typical CoolSculpting session takes about 45-60 minutes. There is no downtime after treatment, so patients can resume normal activities right away.

When will you see results from Coolsculpting?

In most cases, patients see some improvement about 3-4 weeks after the first CoolSculpting treatment. However, full results can take up to 2 months to show.

The effects of CoolSculpting appear gradually. Once the fat cells are frozen, they eventually die, but it takes time for the body to process and expel the fat. The treated fat cells are gone for good. However, in order to sustain results in the long term, patients will have to maintain a healthy lifestyle by eating a balanced diet and getting regular exercise.

Are you ready to book your CoolSculpting appointment? Search our directory to find a practice in your area.

If you are in the Rockwall, TX area, Juvanew Medspa is our featured practice.

You can reach them at www.juvanew.com, or by calling (214) 771-4611.

What Are The Benefits of DualSculpting?

What Are The Benefits of DualSculpting?

CoolSculpting has become the cool way to fight fat, because it is a quick, efficient treatment. It is the ideal option for those looking for an effective, non-invasive solution for stubborn fat. But DualSculpting, using two CoolSculpting machines, is also growing in popularity, but what are the benefits of DualSculpting.

CoolSculpting and DualSculpting
CoolSculpting is a fat reduction technology that uses controlled cooling to get rid of unwanted fat cells. The fat freezing procedure takes 30-45 minutes, and there is no downtime, so patients can resume normal activities right away. CoolSculpting gets rid of 20-25% of fat cells in a treated area.

With DualSculpting you get the same great results but in half the time, because two CoolSculpting machines work simultaneously to treat separate areas.

Benefits of DualSculpting
The CoolSculpting handpiece is designed to address one treatment area. Therefore patients wanting to treat their ‘love handles’ would have to make 2 appointments to treat both sides. With DualSculpting, both sides can be treated in the same session. Therefore DualSculpting saves time, because it allows you to treat more troublespots at one time.

DualSculpting makes it even easier to do away with unwanted fat, because it decreases treatment time and increases efficiency. Since DualSculpting makes it possible to sculpt two areas like the upper arms or thighs in a single session, the results will be similar and more symmetrical. So you won’t have to treat one side and then wait for the other side to catch up, because they will both be treated at the same time.

Are you ready to try DualSculpting? Search our directory to find a practice in your area.

If you are in the Athens, GA area, Pittman Plastic Surgery is our featured practice.

You can reach them at www.pittmanplasticsurgery.com, or call (706) 549-3203 to set up a consultation.

How many CoolSculpting treatments will I need?

How many CoolSculpting treatments will I need?

If you’re considering CoolSculpting fat reduction you’re probably eager to find out how many treatments you will need to see results. The number of treatments needed will be influenced by the type of results you want, so it’s not going to be the same for every patient.

CoolSculpting
CoolSculpting is a non-invasive fat reduction system that uses controlled cooling to freeze and kill fat cells. It reduces areas of fat that are resistant to diet and exercise. CoolSculpting can be used to treat the abdomen, flanks, bra fat, back fat, inner and outer thighs, and under the chin.

There is generally some swelling and bruising after CoolSculpting treatment, but this does not stop patients from going about their daily routine.

How many CoolSculpting treatments will you need?
Ideal candidates for CoolSculpting should be within 10-20 pounds of their ideal weight. Patients near their goal weight generally only need one round of treatment to achieve the desired improvement in body contours, as a single session reduces fat in the treated area by 20-25%. This level of reduction can significantly reduce stubborn bulges, but if you would like even more improvement in the same area another treatment may be required.

CoolSculpting treatments are spaced about 4-6 weeks apart. This is necessary to give the body time to dispose of the fat cells from the previous treatment (click here to learn more).

CoolSculpting is not a weight loss solution and is not meant to reduce large pockets of fat, as it targets specific problem areas.

Are you ready to banish those unwanted bulges? Search our directory to find a practice in your area.

If you are in the greater Washington DC area, Capital Laser and Skin Care, Chevy Chase, MD is our featured practice.

You can reach them at www.capitalskinlaser.com, or by calling 301.798.9699.

How many CoolSculpting treatments do I need to see results?

If you are healthy and in pretty good shape, but have a few areas of stubborn fat that you can’t seem to shake, CoolSculpting may be the solution for you. CoolSculpting is a non-invasive fat reduction device that eliminates fat by freezing it. But where can it be used and how many CoolSculpting treatments do you need to see results.

Where can CoolSculpting be used
CoolSculpting is an FDA approved device that is designed for use on the abdomen, flanks, thighs, and back. Italso has a smaller applicator for contouring fat below the chin.

How does the CoolSculpting treatment work?
A protective gel pad is placed over the area being treated before the suction applicator is applied. The applicator pulls in the fatty tissue, and delivers precisely controlled cooling to the areas being targeted for fat reduction. Patients will feel intense cold at the start of the procedure, but the area will go numb after a few minutes. The cool temperatures freeze and destroy the fat cells, which are then flushed by the body.

How many CoolSculpting treatments do you need to see results?
It generally requires 1-3 CoolSculpting treatments to see results. However, the number of sessions needed will be influenced by the amount of fat that has to be treated, as well as your aesthetic goals. Most patients notice some improvement about 3 weeks after treatment, but it can take up to 2 months for the final results to be seen.

If you have pockets of unwanted fat that won’t go away no matter how much you diet and exercise, CoolSculpting may be a good choice for you.

CoolSculpting is available at Skin Cancer Specialists P. C. & Aesthetic Center in the greater Atlanta metro area.

Call today to schedule a consultation, or go online to www.skincancerspecialists.com/locations-appointment/.

Powered by WordPress & Theme by Anders Norén